Product Description
. . . . . The FXRIO16 Remote Input/Output (I/O) module expands an FX Supervisory Controller (controllers with NiagaraAX-3.4 or later and an available RS-485 port) with 16 I/O points that can be remotely located, including:
Eight universal inputs, compatible with 0-10 VDC, 4-20 mA, dry contacts, pulsing dry contacts, 0-100k ohm resistive, or Type 3 thermistor temperature sensors.
Four digital outputs (DOs) with Form-A relay contacts; for on/off control of loads up to 24 VAC/ VDC, at 0.5 A maximum.
Four 0-10 VDC analog outputs (AOs) for analog control of loads at 2.5k ohm minimum, or 4 mA drain maximum. The FXRIO16 module uses DIN rail mounting and has two end-mounted, 6-pin connectors that support direct-chaining (in-line attachment) to other FXRIO16 modules. Communications to the remote FX Supervisory Controller use RS-485 multidrop on three wires of an end-mounted, 6-pin connector. The other three wires on that connector are primary DC power and battery backup for the module, which can be supplied from the same FX70 Supervisory Controller. For FX20/FX30E/ FX60/FX60E Supervisory Controllers, you power the FXRIO16 locally with a DIN-mountable LP-FXPM263-0 universal AC power supply module, or a third-party 12-15 VDC power supply, and wire only the RS-485 bus back to the parent FX Supervisory Controller.. Johnson Controls. Johnson Controls. LP-FXRIO16-0.