Product Description
. . . . . The SE-ECO1001-1 Economizer Controller is a newly designed controller that meets the requirements of the Series Packaged Equipment. The new economizer controller replaces the existing third-party economizer controller. The economizer controller communicates via standard Sensor/ Actuator (SA) bus to the main controller of the roof top unit (RTU), the Unit Control Board (UCB). When the economizer is installed as a field option, the controller is factory mounted with a wiring harness that is necessary for connection. Once connected, the economizer controller receives power and communication from the UCB. No additional programming is required in the field. The controllers automatically discover each other, and enable the economizer application to execute. You need to set a few configuration parameters using the local UI or the Mobile Access Portal (MAP) Gateway. The economizer control meets Title 24 standards. The economizer has the ability to report up to five dedicated Fault Detection Diagnostics (FDD) through the local LCD, network sensor, thermostat with the X output for faults, or MAP gateway. In cases of equipment integration into a building management system (BMS), the same faults are communicated via the standard communication protocols.. Johnson Controls. Johnson Controls. SE-ECO1001-0.